Canon.com/ijsetup
Setup For canon.com/ijsetup
If you are looking for the Canon.Com/ijSetup, this comprehensive guide will come in handy. We will take you through some easy to execute effective methods of Canon.Com/ijSetup on Mac, Windows XP, and only Windows devices.
So keep reading and perform the Canon printer IJ setup via WPS connection or USB in no time. Here we go:
Canon.Com/ijSetup Via WPS Connection
Things You Need to Do Before Starting the Process.
Configuring www.canon.com/ijSetup with the help of WPS connection is one of the easiest and best ways to connect your printer to your WiFi and system. Before kickstarting the Canon.Com/ijSetup, you should do the following to make your device setup ready:
1. Your Canon IJ printer must have an access point with a physical WPS button. If you can see the WPS button near the screen, check with the user guide of the printing device for details.
2. In case your Canon printer does not have a physical WPS button, make sure you use another method to configure the instructions of the Canon.Com/ijSetup in the Standard Connection Method.
3. In order to connect the Canon IJ printer to your system and network, you must have a network that has a WPA2 security protocol or WPA (Wi-Fi Protected Access).
Once you have gone through the aforementioned points and are ready for executing the correct steps for the Canon.Com/ijSetup, go through the next section and learn how to add or connect your Canon printer to wireless and wired networks.
How to Perform Canon Printer IJ Setup By WPS Connection
The WPS connection method to configure Canon.Com/ijSetup is one of the easiest ways of connecting your Canon IJ printer to any wireless network. Follow the below-mentioned steps one by one and complete the setup in no time.
• Turn on your printer by pressing long on the ‘Power’ key on the top of the Canon IJ printer.
• Look for the ‘WiFi’ button on the printer and press long on the button and wait until the WiFi lamp flashes once.
• When the WiFi lamp beside the WPS button will flash blue, you will have to go to the Wifi Router.
• Press long on the WiFi button on the router within a minute.
• Now, your Canon printer will start searching for all the available Wifi networks and while searching the Wi-Fi lamp on the printer will keep on flashing.
• Once the search is completed, scroll down the list of the available wireless connection and click on your Wi-Fi connection by its ‘Name’.
• You will be asked to enter the correct ‘WPS Password’, enter the same, and hit the ‘Connect’. Follow the on-screen information and follow the right clicks to complete the procedure of the Canon.Com/ijSetup properly.
Canon IJ Printer Network Settings
After following the prior method of how to configure the www.canon.com/ijSetup, the printer must be connected. But, if you want to confirm that your Canon IJ printer is connected and working successfully. Follow the below-mentioned steps and print out any document from your printer:
• If you have switched off your printer, turn it on by pressing long on the ‘Power’ key on the top of the printer.
• Fill the paper tray with A4 sheets or letter-sized sheets of white colour.
• Navigate towards the screen of the printer and click on the ‘Resume/ Cancel’ button and press long on it. The alarm light will blink 15 times, then take off your fingers before the button.
• The network details page will automatically be printed.
On the printed paper, check that the ‘Connection’ means ‘Active’ and that the SSID-Service Package Identifier (the name of your wireless network) means the appropriate wireless network name.
After confirming that the printer is working and it is connected well. Proceed by performing the Canon.Com/ijSetup download steps and installing the program.
There are two ways to download a Canon printer program, one is via the CD that came with your printer and another by downloading the program from https://canon.com/ijSetup website manually. Follow the next section and learn the standard method of connecting the Canon printer:
Standard Connection Method Via CD
• If you are a Windows user, then start your system by pressing long on the ‘Power’ button.
• Once the system is on, right-click on the cursor and refresh the program for hassle-free performance.
• Take out the CD that came with the Canon printer and insert it in the ‘Disk Tray’.
(Click on the button in the right side of the laptop or on the CPU and open the disk tray, use the same button to close it)
• If the inserted program does not pop up on your screen, go to the ‘Computer’ folder.
• Double-click on the ‘CD Drive’ and when the confirmation pops-up on the screen, click on the ‘Run’ and run the setup.
• In case you are a Mac user and not carrying the installation CD then, visit the official page of Canon printer or type: https://canon.com/ijSetup on the URL box and download the correct canon IH printer program.
• After running the CD, a Canon IJ series window will appear on your screen, hit on the [Next] button.
Canon Ij Setup For Mac Users
• In the new window, enter your ‘Password’ in the required tab and allow the tool to be configured by hitting on the ‘Install Helper’.
• Click on the ‘Next’ and when a window appears with a message, ‘Starting the software installation, follow the on-screen instructions.’
• Kindly select the ‘Wireless Link’, when a window will appear to notify you that you must choose between a USB or wireless link.
• Make sure that the Canon IJ printer is on, otherwise, press on the ‘Power’ button and turn it on and click on the ‘Next’
.• Under the ‘Printer Setup’ column, navigate towards the right side and click on the ‘Connect to the network.
’• In the next window, under the ‘Setup procedure Selection’, click on the ‘Cableless setup’.Note: If you are a Windows XP user, then you must know that the cableless installation procedure is not supported by your system. Hence, select the ‘Other setup’ option.
• As you per your prior step, the ‘Connection via Cableless setup’ window will appear.
• Now, click on the ‘Wi-Fi’ button (A, as shown in the figure) on the top of your printer before the orange warning light (B, as shown in the figure) flashes twice
• After that, release the button after the second flash. Also, confirm the following: o The Wifi lamp must be flashing of Blue colouro The power lamp must be flashing of Green colour After confirming, click on the ‘Next’ button.
• In the new window, click on the ‘Next’ button and remember that your network connection will disappear while following the Canon.Com/ijSetup.
Canon Ij Setup For Windows XP Users
[Under the ‘Setup Procedure Selection’, click on the ‘Wireless Setup Using the USB Cable’]
• When the ‘Select your place of residence’ choose one region and click on the ‘Next’.
• In the next window, select the software you want to install by checking the boxes in front of the options and click on the ‘Next’.
Note: In case, you are not sure with the software for installation, check all and uninstall the unwanted software later.
• In the following window, when the
Canon Ij Setup For Windows Users Only
• In the subsequent window, under the ‘Please allow all install wizard processes’, click on the ‘Next’.
• In the next window, the name and the model of the printer of your Wi-Fi network will be mentioned.
IJ Start Canon Setup For Windows (except Windows XP) Users
• When the ‘Setup Completion’ tab, click on the ‘Complete’.
After following the aforementioned steps, the Canon IJ printer setup will be completed.
Note: Make sure that if the Windows XP users cannot detect any printer, they must continue with the USB installation procedure.
IJ Start Canon Setup For Mac Users
• In the next window, under the ‘Add Printer’ section, navigate towards the downwards and click on the ‘Add Printer’
• In the following window, click on the ‘Default’ and under the ‘Name’ select the ‘Canon IJ Network’ and navigate towards the lower-right corner of the window to click on ‘Add’.
• Then, click on the ‘Next’ to wrap up the Canon.Com/ijSetup method.
Method 2:
How to Perform www.canon.com/ijSetup By USB Cable?
For the Windows users who want to connect Canon printers with the USB cable, follow the below-mentioned steps:
• Choose the option of ‘Set up network connection via USB’, click on the ‘Next’.
• In the following window, under the option of ‘Connect your printer to your computer using the USB cable’, click on the ‘Next’.
• Wait until the Canon printer is detected to the computer, in the following window, when the system asks, ‘Do you want to allow access to this item’ click on the ‘Allow’.
• Now, disconnect the printer from your system and click on the ‘Next’.
• When the ‘Setup Completion’ window appears on your screen, click on the ‘Complete’.
IJ Start Canon Setup For Mac Users
• Once you see that the Canon IJ printer is detected, click on the ‘Ok’ tab.
• And then, in the next window, click on the ‘Add Printer’.
• When the list of the printers will appear, choose the ‘Canon IJ Network’ and click on the ‘Add’.
• Hit the ‘Next’ tab and with this step, the Canon.Com/ijSetup will be concluded.
In the end, click on the ‘Finish’ tab to end the process of HTTP IJ start Canon setup for Mac or Windows. After following the guide on Canon.Com/ijSetup above, we are hopeful that you could connect your Canon IJ printer with your system and wired/wireless network on Mac, Windows XP, and all the devices. For any information on www.canon.com/ijSetup, contact
